This mouse test reads the raw button, scroll, and double-click events your browser receives, so it shows what your mouse actually reports, not what should happen. Click the left, middle, and right buttons to confirm each one registers, scroll up and down to check the wheel, and watch the gap between two clicks on the same button to catch a worn switch that double-clicks on its own. Below: how to read each result and how to tell a dying mouse from a software setting.
Testing the mouse buttons
Press each button inside the test box. Left, middle, and right each light up while held and turn green once they have registered, and the panel shows the browser's button value (0 = left, 1 = middle, 2 = right). A button that never lights up is not registering, usually a failed micro-switch or, for the right button, a browser extension or OS setting intercepting the context menu. The test box suppresses the context menu so the right click is captured here.
Double-click and the chatter test
A healthy mouse only double-clicks when you click twice quickly on purpose. A worn switch "chatters": a single physical press bounces and registers as two, so files open when you meant to select them. This tool shows the gap in milliseconds between two consecutive clicks on the same button. If you see very short gaps (under ~70 ms) that you did not intend, that is the classic sign of a failing left button. Try several deliberate single clicks and watch whether any register a second click on their own.
Scroll wheel test
Scroll up and down inside the box. Each direction is marked tested once it fires, and the notch counter rises with every step of the wheel. If scrolling one way does nothing, skips, or jumps the wrong way, the encoder in the wheel is dirty or worn. A wheel that occasionally scrolls up when you push down is the scroll-wheel version of button chatter.
Mouse fault or software setting?
If a problem shows up here it is almost certainly hardware, because this page reads the events directly. But check the obvious software causes too: the double-click speed and button swap settings in your operating system's mouse control panel, the pointer polling rate, a flat battery or weak signal on a wireless mouse, and a dirty sensor on the underside. Testing a second mouse, or the same mouse on another computer, is the fastest way to confirm which side the fault is on.