November 11, 2026 ยท 6 min read
How to Test Your Mouse: Double-Click, Buttons & Scroll Faults
Test your mouse buttons, scroll wheel, and double-click in the browser, and learn to spot switch chatter, the worn-button fault that makes a mouse double-click on its own.
A mouse that double-clicks when you click once, drops clicks, or scrolls the wrong way is usually a hardware fault, and you can confirm it in seconds in your browser. Here's how to test every part of your mouse and read the results.
Quick answer
Open the mouse test and, inside the box, click all three buttons, scroll both ways, and double-click. Each button turns green once it registers, and the panel shows the last button, the scroll direction, and the gap between clicks. If single clicks show very short gaps you didn't intend (under about 70 ms), your mouse is chattering, which is a worn-button fault.
Testing the buttons
Press each button inside the test area. Left, middle, and right each light up while held and turn green once they've registered, and the panel shows the browser's button value: 0 for left, 1 for middle, 2 for right. A button that never lights up isn't registering, usually because the micro-switch has failed. The mouse test suppresses the context menu so your right click gets captured here instead of opening the menu.
The double-click (chatter) test
A healthy mouse only double-clicks when you deliberately click twice in quick succession. A worn switch chatters: a single physical press bounces and registers as two, so files open when you meant to select them, or you drop an item you were dragging.
The tool shows the gap in milliseconds between two consecutive clicks on the same button. Click once, deliberately, a few times. Very short gaps you didn't intend, under about 70 ms, are the tell-tale sign of a failing left button. It's one of the most common mouse faults, and the main reason people throw out a mouse that's otherwise fine.
The scroll test
Scroll up and then down inside the box. Each direction is marked tested once it fires, and the notch counter climbs with every step of the wheel. If scrolling one way does nothing, skips, or jumps the opposite way, the wheel's encoder is dirty or worn, which is the scroll-wheel version of button chatter.
Fixing a double-clicking mouse
If the manufacturer's software lets you set a debounce time, a longer value hides mild chatter. Failing that, blow compressed air around the switch, since dust is a common cause. If you're comfortable opening the mouse you can re-tension or replace the switch; the part is cheap but the repair is fiddly. And check the OS settings too, because double-click speed and swapped buttons live in your system's mouse control panel, and a wireless mouse with a weak battery can act up in ways that look like hardware failure.
Hardware or software?
Because the mouse test reads the raw events, a problem that shows up there is almost certainly hardware. Confirm it by testing a second mouse, or the same mouse on another computer, which is the fastest way to tell which side the fault is on.
Run the mouse test to check your buttons and scroll, then measure your click speed on the CPS test, since a mouse that drops clicks will cap your score. Sorting out the keyboard as well? Use the keyboard tester.